[pigscanfly]

I was just wondering how difficult it would be to replace a clutch in a honda 300ex. I have a buddy who's clutch went out and I'm pretty mechanically inclined but I have never replaced one on the 300ex.

 

[GRIZZLYWIZARD]

It has been a long time since I have worked on a Honda clutch. But memory serves me that it isn't that difficult.

 

[Bear Humper]

if you have replaced anything that has a clutch basket they should be relatively the same or at least I would think so..The hardest part for me was always getting the friction disks and springs right, other than that the 250x and 300 ex are the same.

 

[muddyman]

if you have replaced anything that has a clutch basket they should be relatively the same or at least I would think so..The hardest part for me was always getting the friction disks and springs right, other than that the 250x and 300 ex are the same.

my dad and i had to replace my clutch in my 300ex and it was not that hard at all

 

[tmisch77]

Hey all, first post... I am having a horrible time getting my clutch basket off on my 1995 300ex, I only see the big 1 and 1/16th bolt in the center... any help would be greatly appreciated Thanks!

 

[Cadman]

Have you tried to look at the Honda Parts Fische to see the exploded view of all the components?