ATV Torture Forums banner

Grizzly Clutch Weight Information

5025 Views 10 Replies 6 Participants Last post by  MaineGrizzlyRider
Yamaha Grizzly 700 Clutch Weight Modification:

This information has been gathered to help others with their Grizzly 700 clutch weight modifications. It is for reference only and gathers information from a number of sources.

Dalton Industries currently sells a kit for $100 on their website, . It includes 12 clutch weights, (8 ) 14.7grams and (4 ) 17grams. The clutch uses (8 ) weights total.
As a reference, the stock 700 weights are approximately 18.5 grams each. Stock 660 weights are 17g and stock Kodiak 450 weights are 14g. These weights can be found at your dealer for approximately $3-4 each.
Dalton recommends the following weight changes according to application:

Stock tire size but heavier: (4) 14.7g weights and (4) 18.5g weights (132.8g)
26-27” tire (0-4000’ elevation): (4) 14.7g weights and (4) 17g weights (126.8g)
28” tire: (8 ) 14.7g weights (117.6g)

It also recommends the 28” setup for 26-27” tires at high elevations.
1 - 2 of 11 Posts
Koko said:
Which setup are you running GW?

I'm wondering if I should try's just that tearing apart a clutch scares me!
Where was the difference found? Low mid high?
I am running the 4-450 weights and the 4 660 weights. I noticed a nice response from 5 MPH and up.
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.