Joined
·
1,822 Posts
It seems to be that every Grizzly 700 site you go to, there's gonna be a thread posted by someone about the Grizzly 700 having a boiling gas problem. Does it boil, does it not boil, that seems to be the question. Then as soon as someone has happily purchased a new Grizlly, they run across such a thread, as did I, not knowing any better and getting concerned. I even found a youtube video at some point "documenting" a Grizzly boiling gas. We're here to clear up this mistaken phenomenon.
The Grizzly 700 does NOT boil gas. It never has, and hopefully never will. Had there ever been such a problem, Yamaha would have recalled every Grizzly 700 for fear of someone blowing their crotch off from the gas boiling. If you look in the tank while the engine is running, the pure vibration of the motor, with the tank positioned above it, makes it APPEAR as if it is boiling. However, it's not. Nothing is happening more than vibration causing a rippling effect on the fuel, giving it such an appearance. If you don't believe us, take a thermometer and see if your fuel is actually at or even near 356 degrees fahrenheit as that's the boiling temp of gasoline.
Another issue with the Grizz 700 that gives it such an appearance is due to a valve that is unable to bleed the pressure off fast enough. This will also result in strong gas fumes while or after riding, and possibly hearing the pressure valve leaking off the pressure build-up. There is a mod you can do to that valve to eliminate the inefficiency of it.
So, hopefully, this has cleared up any questions about this issues and helps you sleep better knowing that your gas is NOT boiling beneath you.
Buster
The Grizzly 700 does NOT boil gas. It never has, and hopefully never will. Had there ever been such a problem, Yamaha would have recalled every Grizzly 700 for fear of someone blowing their crotch off from the gas boiling. If you look in the tank while the engine is running, the pure vibration of the motor, with the tank positioned above it, makes it APPEAR as if it is boiling. However, it's not. Nothing is happening more than vibration causing a rippling effect on the fuel, giving it such an appearance. If you don't believe us, take a thermometer and see if your fuel is actually at or even near 356 degrees fahrenheit as that's the boiling temp of gasoline.
Another issue with the Grizz 700 that gives it such an appearance is due to a valve that is unable to bleed the pressure off fast enough. This will also result in strong gas fumes while or after riding, and possibly hearing the pressure valve leaking off the pressure build-up. There is a mod you can do to that valve to eliminate the inefficiency of it.
So, hopefully, this has cleared up any questions about this issues and helps you sleep better knowing that your gas is NOT boiling beneath you.
Buster