ATV Torture Forums banner

Fabbed up a little somethin for the grizz

2748 Views 6 Replies 3 Participants Last post by  BATTLEGUN
Fabricated up the front of the dash panel with a piece of the old fender i broke.

See less See more
1 - 3 of 7 Posts
used a hack saw for the rough outline then i used a belt sander to get it just right. then i took fine sand paper and sanded the edges to make it look as professional as possiable.
It had a lip on it...i just bolted it under the dash.
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.