ATV Torture Forums banner

outlander

  1. Can-Am/BRP Forum
    Hi all, I recently purchased a 2006 Outlander 800. I rode a few times but I want to grease up. I'm a bit of a nooby when it comes to this stuff. Is there a dummies guide on where the grease zerks are located? Or any suggestions? I bought this AtomLube all purpose grease, hoping it's the right...
  2. Site News
    450cc ATV throwdown The recent release of the Yamaha Kodiak 450 caught a lot of people’s attention and caused someone to recently ask if it signaled a return to economically priced machines with smaller engines. To that, we’d simply say no. There have been moderately-priced machines in the...
  3. Site News
    ATV mud wrestling What kid didn’t grow up loving to play in the mud? For some of us, we never outgrow that desire to mix water and dirt together into some slimy goo and find a way to bring big smiles. Some ATV riders find mud on the trail and go around it. Others go through it, but reluctantly...
  4. Site News
    Mid-heavyweight ATV showdown So you want a new ATV but you’re not sure of which one you are going to get. You don’t need the massive horsepower of the 1,000-class machines, but at the same time want a bit more oomph than can be found with the machines in the 500-class area. If you want a...
  5. Site News
    Two high-powered mud machines do battle in this specs comparison Dirt and water – two things that make up most of the planet and both vitally important to life. Add them together to create mud, something that for many of us is very important to “livin’ it up.” Playing in the mud is something we...
  6. ATV Torture News
    Read more about the 2015 Outlander L 500 DPS Review at ATV.com.
  7. For Sale
    no longer have
  8. Can-Am/BRP Forum
    have a new 650 outlander with 250 miles on it. it lurches when i come down steep hills. appears to be a problem with the belt and clutch. the dealer said to get more miles on it to glaze the clutch. It almost give me whiplash. i understand the engine braking and have ridden many four wheelers...
  9. For Sale
    2010 Can-Am Outlander 800XT . It has all the options 3000lb warn winch hand guards priemium wheels with brand new factory tires. I installed aftermarket headlight bulbs, canam factory heated grips. It has a 400 dollar ricochet full skid plate wich for these machines is a must. The quad is in...
  10. For Sale
    09 canam outlander max xt 916cc (repost) Putting this back up again. decided to keep it, changed mind, with two rides & l50 miles on new build to 916cc (MR.RPM). Mr.RPM GENII cams, Mr RPM bored throttle body, it loaded. has full HMF exhaust, STM RAGE 6 primary & secondary clutches, new belt...
  11. Can-Am/BRP Forum
    I just bought this Outlander 1000, and thought I would post some initial impressions. Maybe it was carma, but the song playing on my Sirius satellite radio when I pulled into the dealershp parking lot was AC/DC "Back in Black", and the song playing when I pulled out of the dealership parking...
  12. Can-Am/BRP Forum
    I just bought an 09 Outlander that was traded in for a side by side. It appears to be taken care of. 140 hours on the engine. No add ons. What can I expect? Everything work as they claim? Any motor issues? Transmission weaknesses? Haven't really tested it yet so pease give me the good, the...
  13. Wanted
    Well...that didn't last long. I sold my Polaris Sportsman 700. Wish I had the cash for a new quad and I'd grab a new Polaris 850. But regardless, I'm now quadless again. For the right deal, I'd have a quad shipped here as long as someone I can trust checked it out (Grizzlywizard, Buster...
  14. Can-Am/BRP Forum
    Hey guys, just traded the '09 Gade 800 on an '11 Outlander 800 X Xc. This sure is one sharp looking skooter, ... for an ATV that looks like a school bus. Just did the first five minute heat cycle on the engine break-in, riding around the block a few times. Can't say much about it yet, other...
  15. Can-Am/BRP Forum
    I'm wondering if there is anyone out there who has had to replace a rear end in their Outlander. Actually, I'd be interested in hearing from anyone who has had to replace a rear end in their quad. Mine is making a terrible noise and I'm pretty sure it's just a matter of time before it goes out.
  16. Can-Am/BRP Forum
    Hey all, I'm new to this forum and finally getting around to my first post. I'm on a couple other forums but just stumbled upon this one and joined up. It seems like there are a few of you on here that are really happy with the results you got from your Dalton clutch kits. So I want to ask...
  17. Can-Am/BRP Forum
    BRP recalls 2010 Can-Am Outlander and Renegade models Bombardier Recreational Products (BRP), in cooperation with the Consumer Product Safety Commission, is conducting a voluntary recall of certain 2010 Can-Am Outlander and RenegadeATV models equipped with Dynamic Power Steering. According to...
  18. Can-Am/BRP Forum
    I've read somewhere (in here I think) about someone having a very annoying squeak on their Outty. I also think it happened after a CV Joint Repair. I have been infected with this same squeak and I did replace my CV Joint not long ago. It does it when I rock it side to side and the noise is VERY...
  19. Can-Am/BRP Forum
    In case anyone needs to know this info, the Renegade 800 and Outlander 800 have 11 grease zerks. On the front a-arms, each upper has 2 and each lower has 2. The front drive shaft has one and if you roll it into the correct position, and attack it from the right side of the vehicle, you can...
  20. Can-Am/BRP Forum
    <p align="center"><font face="Arial"><img border="0" src="http://atvtorture.com/forums/images/daltonouty/DI%20title%20header%20Mod%201.gif" width="514" height="67"></font></p><p><b><font face="Arial" size="4">Dalton Clutch Kit Installation - 2009 Can-Am Renegade 800</font></b></p><p><font...
Top