Project-X Sponsors

[1Bad1000Xxc]

If you are a product manufacturer or re-seller that has products available for the Can-Am Renegade 800, and would like to contribute to Project-X, please contact us with your proposal. Our team will review your idea and notify you of our decision right away.

	Blown Concepts creates custom vinyl graphics and their dedication to eye-catching designs and durability have been proven time and time again. For this project, Blown Concepts has designed an entire graphics kit for the Can-Am Renegade 800-X. .....Read the Review Contact Information: (Web Site) http://www.blownconcepts.com (Phone) 763.694.8951 (Email) sweetjob0@earthlink.net (Address) 2078 East center Circle, Plymouth, MN, 55441
	Dalton Industries provide clutch kits for various makes and models of ATVs. To try to get the best performance out of our Can-Am Renegade 800, we went with one of their clutch setups to be able to maximize the power output of this beast. Read the Review Contact Information: (Web Site) http://www.daltonindustries.com (Phone) 902-897-3333 (Email) info@daltonindustries.com (Address) 355 Vimy Rd., Turo, Nova Scotia, B2N 4K2 Canada
	Dick's ATV Tires and Accessories is your #1 choice for low prices on Tires, Helmets, Parts and Accessories for your All Terrain Vehicle. Owned and operated by ATV enthusiasts, Dick's ATV is commited to providing the best ATV Tires and Accessores, at the best prices, and with no hassles, run-arounds, or games. For this project, Dick's ATV is providing a set of ITP Type 7 beadlock wheels, an item that will really help bring Project-X together. Contact Information: (Web Site) http://www.dicksatv.com (Phone) 877.764.8313 (Email) mike@dicksatv.com (Address) 96 State St., Presque Isle, ME, 04769
	Direction 2 Inc. manufacturers motorcycle and ATV windshields and accessories. For this project, Direction2 brings us a set of their well-made over-fenders, an item that is very much need on the Renegade......Read the Review Contact Information: (Web Site) http://www.direction2.com (Phone) 450.971.0407 (Email) info@direction2.com (Address) Div. Créations Direction 2 Inc., 50, Sicard #114, Ste-Thérèse, Québec, CANADA J7E 5R1
	East Coast ATV Snorkels makes a really nice snorkel setup for teh Can-Am Renegade and Outlander, among other makes and models of ATVs. Because the factory breather configuration is a bit low in design, a good snorkel setup is a must for these quads....Read the Review Contact Information: (Web Site) http://www.eastcoastatvsnorkels.com (Phone) 908-339-2111
	FASST Company produces aftermarket motorcycle and ATV products such as Flexx Handlebars, Spoke Torque Wrench, Brake Clevis, Anti-Vibration Inserts and Rim Lock Spacers. On the Project-X Renegade, will will be installing a set of Flexx Handlebars....Read the Review Contact Information: (Web Site) http://www.fasstco.com (Phone) 562.601.8119 (Email) information@fasstco.com (Address) 3015 E. South St., Long Beach, CA, 90805
	Gristle Boyz is a distributor and designer of high performance ATC and ATV enhancements from turbo charging to lift kits and everything in between. We will be installing their custom bumper built for the Can-Am Renegade 800.....Read the Review Contact Information: (Web Site) http://www.gristleboyz.com (Phone) 403.507.1710 (Email) steve.laslo@gristleboyz.com (Address) Canada
	Oury Grips provide the performance and comfort that you expect from teh ebst. We had used Oury ATV grips on other applications and loved their comfort and durability. When we found out Oury has the same grip available in an ODI lock-on version, we knew we had to have it. No worries with grip glue with these grips and they are there to stay when you bolt them on. Contact Information: (Web Site) http://www.ourygrips.com (Phone) 870-869-3265 (Address) 1069 College Ave., Wheaton, IL 60187
	Powder Coating by JLC is a company out of Macon, Georgia that does high quality powder coating of motorcycle, ATV, UTV, dirt bike and street bike parts. They are capable of powder coating pieces large or small, ranging in size from footpegs to swing arms or full frames. Dedicated to perfection of every job, JLC was just who we needed for our project. Powder Coating by JLC did an excellent job powder coating the stock shock spring on our Renegade 800-X from the factory yellow to a candy apple red....Read the Review Contact Information: (Web Site) http://www.jlccoating.com (Phone) 478.319.2695 (Email) sales@jlcweb.com
	Quad Tech ATV is known for their high quality and very stylish seat covers available for a large number of dirt bikes, utility ATVs and sport quads. We installed their seat cover on the Project-X Renegade.....Read the Review Contact Information: (Web Site) http://www.quadtech-atv.com (Phone) 949.859.7823 (Email) info@quadtech-atv.com (Address) 23011 Moulton Parkway, Suite C-1, Laguna Hills, California, 92653
	Ricochet Offroad is known for their high quality and extremely durable skid plates made available for a large number of dirt bikes, utility ATVs and sport quads. We will be installing a full set of Richochet Offroad Armor and the Project-X Renegade. Contact Information: (Web Site) http://www.ricochetoffroad.com (Phone) 866.273.1197 (Email) dh_gibbs@comcast.net (Address) 3375 S. West Temple, Salt lake City, Utah, 84115
	Rox SpeedFX sells handlebar risers, handguards and more for ATVs, Snowmobiles and Dual Sport Motorcycles. For the Project-X Renegade, we will be installing a set of Rox SpeedFX handlebar risers and full wrap handguards on our FASST Flexx bars. Contact Information: (Web Site) http://www.roxspeedfx.com (Phone) 218.326.1794 (Email) sales@roxspeedfx