2010 Can-Am Renegade 800R EFI

**GRIZZLYWIZARD** · #1 (**permalink**) 05-29-2009, 01:24 AM

2010 Can-Am Renegade 800R EFI

Standard package features:

Rotax 799.9 cc V-twin EFI engine with 71 hp
RS-type double A-arm front suspension with dive-control geometry and 8.5-inch (216 mm) travel
RS-type TTI rear suspension with 9-inch (229 mm) travel
Fade-resistant HPG shocks
Visco-Lok auto-locking differential
Lightweight center-cast-aluminum wheels with ITP Holeshot∞ ATR sport radial tires
Separate front and rear brake controls
Multi-purpose digital gauge
Four 60W projector beam lights
Full floorboards with kick-up aluminum pegs

Manufacturer Suggested Retail Price (MSRP): $9,699 US

dleejr12 · #2 (**permalink**) 06-01-2009, 09:45 PM

what is the hp diff 09 vrs 2010 renny and how did they get it. is there any low end top end issues like between 09 vrs 08. was it a type error on the diff gas tank size or is the 2010 a gallon smaller. any other diff that can be discussed between 08 vrs 2010 rennyXxc

**GRIZZLYWIZARD** · #3 (**permalink**) 06-02-2009, 08:27 AM

Very good questions, definitely need to look into that myself.

**1Bad1000Xxc** · #4 (**permalink**) 06-02-2009, 09:15 AM

Here are a couple of differences between the 2009 X and 2010 Xxc:

Dry Weight:
2009 - 607lbs
2010 - 614lbs

Fuel Capacity:
2009 - 5.3 u.s gallons
2010 - 4.3 u.s gallons

Stator output:
2009 - 400 watts
2010 - 650 watts

Power Steering:
2009 - no
2010 - yes

Improved vsco-lok performance from 09 to 10.

Bore & stroke is the same between the two years as is throttle body size.

As for pipe fitment and such, i don't see any reason why the 2010 would require a different exhaust than the 2009. The 2010 parts catalog is not up yet so I can't check part numbers to see if the 2009 and 2010 exhausts are the same number. If they are, that would answer that question and I'm guessing they will be.