|
Folks, with the Dynatek DFS9-3 and DFCA-15, do you just tape off the DFS9-3's FI harneses and TSP harnesses since the DFCA-15 plugs into the stock harnesses and sensors? I just recieved mine and the instruction don't say how to use these two in conjuction! Just wanted to make sure I was using the right ones. Im assuming I am just using the DFS9-3 to plug into the crank position sensor and Ignition coil with the remaining plugs taped off. Then the DFCA-15 connects to the Injectors and TPS Sensor and stock harnesses for them. Anyone set these up? Any help would be appreciated. Thanks Steve
|
